Key Points For Replacing Automotive Parts

Firstly, try to use sealant as much as possible, and if necessary, use paint as a substitute to achieve the desired sealing effect;

Secondly, the appearance quality of rubber seals should be carefully inspected before assembly; Use specialized tools for pressing to avoid deformation caused by knocking;

Thirdly, add lubricating grease according to regulations, regularly clean and unblock ventilation holes and one-way valves, etc;

Fourthly, assemble under extremely clean conditions, with no bumps, scratches, burrs, or other attachments on the working surface of the parts;

Fifth, strict operating procedures should be followed, and sealing components should be installed correctly to prevent deformation if not in place;

Sixth, master the performance specifications and usage requirements of sealing components, and replace faulty components in a timely manner;

Seventh, for thin-walled parts with edge covers, sheet metal cold work correction shall be adopted; Axis hole parts that are prone to wear and tear can be processed using processes such as metal spraying, welding repair, adhesive bonding, and mechanical processing to achieve their original factory dimensions;

Eighth, if the sliding thread of the nut is broken or loose, it should be repaired or replaced with a new part, and tightened to the specified torque.